• 从动盘故障
  • 盖总成故障
  • 轴承故障
  • 飞轮故障
  •  
    维护中心>盖总成故障
    盖总成故障

    2.1 Noise while depressing clutch pedal


    Cause
    • Off centering of the release bearing or mis-alignment of the main shaft.
    Suggestion
    • Replace the release bearing.
    • Realign the engine and the gear box.

    2.2 Burn marks on the pressure plate



    Cause
    • Oil or grease contamination on the clutch linings or on the pressure plate.
    Suggestion
    • Locate and repair all sources of contamination.
    • Replace the clutch kit.
    Solution
    • Apply the correct quantity of grease on the clutch disc splines and the input shaft.
    • Do not use contaminated pair of gloves.


    2.3 Circular grooves appearing on the pressure plate



    Cause
    • Linings worn out, heads of the facing rivets are in contact with the pressure plate.

    2.4 Finger worn asymmetrically




    Symptom
    • Shudder when start the car, difficult disengagement, noisy changing gear.
    Cause
    • Diaphragm spring was amounted asymmetrically
    • Release bearing was not concentric.
    • The main shaft was lead.
    Solution
    • Change a new cover.


    2.5 The finger of clutch cover interfering with clutch disc




    Cause
    • The release bearing is over stroke which causes interfere.
    • The clutch cover is incorrect.
    • The clutch disc is incorrect.
    • The size of clutch disc is out of tolerance.
    • Not all the clutch with same dimension and amounting size could be used.
    Suggestion
    • Change a new clutch kit completely.
    产品推荐
    Rios No.: RKTY-2716
    Make:TOYOTA
    Size:275/21
    Rios No.: DCTVW-001
    Make:VW
    Size:.
    Rios No.: RDVL-4315
    Make:VOLVO
    Size:430/24